Innosilicon A10 PRO

模型 A10 Pro ETH Miner (500Mh) 从 Innosilicon 矿业 EtHash algorithm 最大哈希率为 500Mh/s 对于功耗 750W.

NEW UPGRADED VERSION PRO – 5GB RAM 

The Innosilicon A10 PRO ETH(500mh/s) is described in detail below

The Innosilicon A10 Pro ETH Miner uses the EtHash algorithm from Innosilicon and has a maximum hash rate of 500MH/s. The power usage is 750W, which is energy efficient and environmentally beneficial. It’s one of the few miners that uses less than 1000W of power. The A10 Pro ETH Miner is a superior option for miners who are concerned about power.

Most miners call it the ETH King A10 Pro, which was released in May 2020. Etherium classic, Etherium, Musicoin, and Ubiq are some of the mineable coins. AntPool, Ethermine, NanoPool, Pooling, and ViaBTC are some of the mining pools that can be found on this site. Metal was employed in the construction of this miner. The number of chips is 342, and the noise level is 75db. Due of its noise capacity, the Innosilicon A10 Pro ETH Miner is also a choice.

The miner’s power is set to a maximum of 860W and it connects through Ethernet. The miner weighs 8.1 kg and features a cooling fan that runs at 12038 RPM. The temperature ranges from 0 to 40 degrees Celsius. Humidity levels are set to 10 to 90%, which is a reasonable range for a 750W system.

• All Innosilicon A10 Pro will be tested by the factory before shipment and certified by Innosilicon.
• 6 Month Warranty From Manufacturer

 处理和运输时间

• 所有订单将按订单交货批次发货。机器将在交货日期后 48 小时内从我们的深圳仓库发货，如果是批量订单，我们可能需要一两天的时间通过（DHL Express/UPS/ARAMEX/TNT）在订单全额付款后发货已验证（通过电汇付款（T/T 需要 3-7 个工作日，通过 CryptoCurrency 支付网关需要几个小时或最多 1 个工作日来验证交易）。

  国际递送通常需要大约 5-8 个工作日。 DDP 运输方式需要 8 -10 天

  *所有销售都是最终的，并且在任何条款下均不可退款。

  注意：所有以加密货币支付的款项都直接与我们兑换成美元，如果出于任何原因必须退款，将按加密货币当前价格的美元价值进行退款（如果加密货币价格高或低，我们会退款作为美元汇率）

•  付款政策

•  税收和关税

•  包装

•  批量订购

Minable coins with Innosilicon A10 PRO

Minable pools with Innosilicon A10 PRO