描述

Ipollo G1 42 Gps Grin Miner With PSU For Sale

Ipollo G1 42Gps Miner For Sale, Model iPollo G1 42Gps 从 Pineapple 矿业 Cuckatoo32 最大哈希率为 42Gps 对于功耗 2800W. Model iPollo G1 42Gps from Pineapple mining Cuckatoo32 with a maximum hashrate of 42Gps for a power consumption of 2800W. iPollo G1 42Gps GRIN Miner: A 180 days warranty is provided starting from the shipped date. Before shipping – Strict quality inspection and carefully packed.

Specifications Of iPollo G1 42Gps GRIN Miner

Manufacturer: iPollo
Model: G1
Also known as: Nano labs iPollo G1 Grin Miner
Release: December 2020
Size :158 x 350 x 355mm
Weight: 19000g
Chip boards: 3
Chip name: FinFET
Chip size: 12nm
Chip count: 30
Noise level: 75db
Cooling: Fan
Fan(s): 4
Power: 2800W
Voltage: 12V
Interface: Ethernet
Temperature: 5 – 40 °C
Humidity: 5 – 95 %

Review of the iPollo G1

This is a mining device created and manufactured by the Ipollo company, and it uses two algorithms to operate. It has a hash rate of around 160Gps at its maximum. The Ipollo device was designed with a 2884W power consumption in mind. The device’s efficiency is aided by this power consumption. It has 30 FinFET ASIC chips with a 12nm process.

After it has been set up, this mining gadget mines and runs well. It uses two algorithms (Cuckatoo32+ and Cuckatoo31+) to mine bitcoins. In December 2020, the device will be available for purchase. It has a noise level of 70dB, which is lower than other ASIC miners, which have noise levels of 75-82dB. The device’s mining process, however, is unaffected by the noise level. It has a rate of 18,025j/kGps of efficiency. It connects to the internet using Ethernet cables.

The only flaw in this device is that its power consumption is inconsistent. The power consumption, however, was confirmed by the producers to be 2800W. Because of the device’s changing power consumption rate, it is recommended that it be powered by a 3500W power source.
When the device’s entrance temperature is 32 degrees, the air exit temperature rises to 46.4 degrees, with a temperature range of 14.4 degrees, which is considered typical.

Further specifications of iPollo G1 miner

The Ipollo G1 grin comes with 30 12nm FinFET ASIC mode G22 chips. A Cuckatoo cycle computing core is integrated inside this smile chip. The chip is 38x38nm in size. This is the first dedicated chip that enables grin in the world. It’s also the only chip available.

During the mining operation, the Ipollo G1 uses four 1438B DC12V 5A cooling fans to disperse heat from the mining equipment.

The advent of the Ipollo g1 grin mining equipment has sparked miners’ interest in the grin community, and it has also provided an incentive for the grin community. The release of the grin mining machine is thought to pave the way for the ASIC era.